Differences

This shows you the differences between two versions of the page.

--- amiga:amiga_floppy_drive_compatibility [2008/11/03 12:53] – 76.191.149.214
+++ amiga:amiga_floppy_drive_compatibility [2019/08/27 20:45] (current) – external edit 127.0.0.1
@@ Line 23: / Line 23: @@
 |Epson          |SMD-300       |Unknown           |Unknown          |      |
 |Epson          |SMD-340       |No                |No               |Has large jumper array on the back-First row labeled G,A,A,T,T,0,(BLANK),1, second row labeled H,(BLANK),L,(BLANK),S,2(BLANK),3. Docs are [[http://www.freewebs.com/computolio/SMD340.TXT|here]].|
+|Mitsubishi     |MF355F-258MG  |Unknown           |Unknown          |      |
 |Mitsumi        |D359T7        |Unknown           |Unknown          |      |
 |NEC            |FD1231H       |Unknown           |Unknown          |      |
 |NEC            |FD1035        |Yes               |N/A              |Low-density drive.|
 |NEC            |FD1036 A      |Yes               |N/A              |Low-density drive.|
-|Panasonic      |JU-253-033P   |Yes               |N/A              |To make it work, set MS/MD to MD, 0/1/2/3 to 0, RY/DC to RY.|
+|Panasonic      |JU-253-033P   |Yes               |N/A              |Low-density drive. To make it work, set MS/MD to MD, 0/1/2/3 to 0, RY/DC to RY.|
-|Panasonic      |JU-253-243P   |Unknown           |Unknown          |      |
+|Panasonic      |JU-253-243P   |Unknown           |Unknown          |Low-density drive.|
 |Panasonic      |JU-257A023F   |Partially         |Unknown          |Has 6 setting switches- 0/3/2/1, M0/M1, RY/DC, AT/PS2, NC/EX(or OUT/EX), A/B.|
 |Panasonic      |JU-257A137P   |Unknown           |Unknown          |      |
@@ Line 36: / Line 37: @@
 |Panasonic      |JU-257A606PC  |Unknown           |Unknown          |      |
 |Panasonic      |JU-257A607P   |Unknown           |Unknown          |      |
+|Panasonic      |JU-257A624P   |Unknown           |Unknown          |      |
 |Panasonic      |JU-257T234P   |Unknown           |Unknown          |Has 5 setting switches- RY/DC, NC/OUT/IN, 0/3/2/1, SE/AT/PS2, MO/MS.|
 |Sony           |MPF920-F      |No                |No               |Has one setting jumper.|
@@ Line 55: / Line 57: @@
 Advice for unknown drives: if there's config switches or jumpers (sometimes you have to open the cover to get to them), experiment with every combination and see if that makes the drive work any better. If there aren't any, it's probably only going to work with the cable hack(which is not a practical solution) or an adapter board(which is costly).
+See also: http://www.pitsch.de/stuff/amiga/floppy.htm