This is an old revision of the document!
Table of Contents
Joystick Mechanisms
Just a fun-filled list of joystick mounts for easy fact finding.
Seimitsu
Seimitsu sticks to two mounting patterns, for the most part. Either a 50mm square, or 40mm.
They're sometimes sold with a choice of adaptor plate, sometimes there's no choice. Sometimes, for special editions (or their NOBI stick) the adaptor plate has a sticker on it that needs to be removed if the adaptor plate doesn't fit your intended panel.
Generally speaking all their adaptor plates are compatible with the stick mechs, so if you have a 40mm stick, any of their P=40 plates will work.
Their entire catalogue of available plates (in 2023) is available on the Adaptor Plates page.
Seimitsu 40mm Mechs
Most of Seimitsu's sticks are 40mm.
- SELS-70X
- LS-62
- LS-60
- LS-58
- LS-56
- LS-55
Seimitsu 50mm Mechs
- LS-32
- LS-40
- NOBI
SNK
Sanwa
Sanwa uses two mount patterns: either a simple 65mm two-screw attachment, or a square pattern that's much smaller than Seimitsu's, and it's rotated 45 degrees. Instead of having one screw on each diagonal, they're on the vertical and horizontal axes.