NFG Games + GameSX

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== 3D Printable Parts for Arcade Controllers =====
The rise of 3D printing has made it possible to create custom parts, often very niche, that would not normally be available.  NFG has whipped up a few, and the internet is full of useful downloads.

==== Seimitsu / SNK Neo Geo Joystick Mech ====

SNK's [[arcade:joystick_mechs#snk_sigma_ascii_seimitsu|Neo Geo sticks]] used a Seimitsu mech (or a clone of it) and is a wonderfully tactile short-throw stick, but it only comes with a square gate.  HAMSANDWICH has created an excellent [[https://cults3d.com/en/3d-model/gadget/neo-geo-aes-octo-gate|octogate option]], which NFG has modified into a 4-way gate for use with older games like PacMan which do not handle diagonal inputs well.

{{ :arcade:neo_geo_aes_quad_gate_v1.1.jpg?400 |SNK Joystick 4-way gate}}

This 4-way gate was released on [[https://www.arcade-projects.com/threads/4-way-gate-for-snk-aes-sticks.28364/post-408856|Arcade-Projects]], and is mirrored here.

{{ :arcade:neo_geo_aes_quad_gate_v1.1.zip |}}

==== SNK Super Neo 29 Candy ====
This adaptor is for the Super Neo 29 Candy cab (and probably most of SNK's Candy cabs).  It uses the same basic panel mount as the Sega *City v1, with a much shallower depth.  More info about this panel mount can be found in the [[arcade:control_panels#snk_super_neo_29_candy|Neo 29 Candy Panel]] entry.

This adaptor plate can be used to mount Sanwa JLF-compatible mechs with the 4-hole mount, as well as both [[arcade:joystick_mechs#seimitsu|40mm and 50mm Seimitsu mechs]].

{{ :arcade:snk-3way-adaptor.jpg?400 |Joystick adaptor plate for SNK Candy Cabs}}

{{ :arcade:snk-3way-1.3.zip |}}

==== Sega * City v1 ====
Sega's Aero and Astro City cabinets used a [[arcade:control_panels#sega_aero_astro_city_v1_panel_mount|2 hole 96mm mount]] with a 75mm gap into which most joystick mechs can fit.  

This adaptor plate will allow [[arcade:joystick_mechs#sanwa|Sanwa JLF-compatible mechs]], as well as [[arcade:joystick_mechs#seimitsu|Seimitsu's 40- and 50mm mechs]].  Because of the functional depth and thickness of the plate (10mm + 3mm respectively) it's possible that some sticks may not easily fit if they use fast-on spade connectors.  

{{ :arcade:sega-3way-adaptor.jpg?400 |Joystick adaptor plate for Sega control panels}}

{{ :arcade:sega-3way-1.3.zip |}}