av:adding_5v_to_scart_lead
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
Previous revisionNext revision | |||
— | av:adding_5v_to_scart_lead [2006/10/30 22:38] – Added images and links nfg | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ===== Adding +5v to SCART cable ===== | ||
+ | It's an unfortunate truth that not all hardware provides power on the video output. | ||
+ | This mod is a solution to the problem, and while the specifics may apply only to the X-RGB2 the theory is valid for any device that doesn' | ||
+ | |||
+ | ==== The Solution ==== | ||
+ | I used a short length of cable with two [[japanese_rgb-15|DB15 connectors]] on it, one male and the other female, to create the shortest extension cable I've ever seen. On the output end I added a short little tail with a clip-on connector, connected inside to pins 7 and 8 (power and ground, respectively). | ||
+ | |||
+ | {{av: | ||
+ | |||
+ | You'll need a power supply of course. | ||
+ | |||
+ | {{av: | ||
+ | |||
+ | ==== Caveats ==== | ||
+ | * You'll want to ensure that each wire is securely soldered. | ||
+ | * I used a stress-relief + graphite lump from a GameCube component cable. | ||
+ | * If you're not using shielded cable (and even if you are!) keep the extension as short as possible. | ||
+ | * Use a reliable connector for the power, and use some wire that's thick enough to not break off or wear out during normal use. | ||
+ | |||
+ | === Apologies === | ||
+ | I don't know what the connector is called that I used for power. |
av/adding_5v_to_scart_lead.txt · Last modified: 2020/07/28 08:48 by NFG