User Tools

Site Tools


av:scart_connector

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Last revisionBoth sides next revision
av:scart_connector [2005/12/17 22:28] nfgav:scart_connector [2008/11/26 13:06] – Slight alteration to the opening paragraph 165.228.204.118
Line 1: Line 1:
 ===== The SCART Connector ===== ===== The SCART Connector =====
-The SCART connector, also known as a Péritel or Euroconnector or, is a multi-function connector that is identical in shape, but not function, to the [[Japanese RGB-21]] connector.  It carries RGB, s-video, composite video in and out, and stereo audio in and out.  It can also carry component video and digital MPG2 video, however these uses appear to be non-standard and the pinout is not known+The SCART connector, also known as a Péritel or Euroconnector or, is a multi-function connector that is identical in shape, but not function, to the [[Japanese RGB-21]] connector.  It carries RGB, composite video in and out, and stereo audio in and out.  It can also carry component video and s-video, however these uses are non-standard and aren't supported by all televisions.  
 + 
 +This page deals only with the RGB uses for a SCART display,  A fantastic page detailing all the other uses for a SCART connector can be found [[http://utopia.knoware.nl/users/eprebel/SoundAndVision/Engineering/SCART.html|right here]].
  
 ==== The Pinout ==== ==== The Pinout ====
Line 19: Line 21:
   * The numbering is the same on the SCART and RGB-21 connectors   * The numbering is the same on the SCART and RGB-21 connectors
   * Direction is display relative.  In = into display.  Out = out of display.   * Direction is display relative.  In = into display.  Out = out of display.
 +
  
  
Line 36: Line 39:
  
   * Not all TVs recognize these signals correctly or at all.   * Not all TVs recognize these signals correctly or at all.
-  * Some TVs will not function without these signals.+  * Some TVs will not function without these signals. A quick fix can be implemented by using a 9V battery (positive lead on Pin 8, negative lead on any of the grounds) and a 150 Ohms resistor between Pin 8 and Pin 16.
   * Some TVs can be manually forced into these modes.   * Some TVs can be manually forced into these modes.
  
Line 44: Line 47:
     * http://www.idiots.org.uk/vga_rgb_scart/     * http://www.idiots.org.uk/vga_rgb_scart/
   * See also:   * See also:
-    * [[wp>scart]] - Note that wikipedia contributors consistently remove content about component video being used in SCART connectors.+    * [[wp>scart]] - Wikipedia has a decent summary of the connector's history and other info.
av/scart_connector.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1