fm_towns:ha_type_power_supply
Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
fm_towns:ha_type_power_supply [2021/07/21 00:52] – created Cyothevile | fm_towns:ha_type_power_supply [2021/07/21 01:55] (current) – Cyothevile | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | HA/HC/HB FM Towns Desktops share this power supply | + | HA/HC/HB FM Towns Desktops share this power supply |
- | C34 near the black relay will generally leak badly just like the other FMT Power Supply. | + | C34 near the black relay will generally leak badly just like the other FMT Power Supply. |
- | C06 requires 10mm spacing between leads. Everything else can use 5mm spacing. | + | C06 requires 10mm spacing between leads. Everything else can use 5mm spacing. |
- | {{: | + | {{: |
+ | |||
+ | \\ \\ | ||
Line 21: | Line 23: | ||
^ C22 | | ^ C22 | | ||
+ | \\ \\ \\ | ||
+ | |||
+ | Here is an explanation of the colors of the PSU wiring harnesses. There are two of them both being a single row. It's possible to cram an ATX inside the metal PSU shield as well if you follow this guide. | ||
+ | |||
+ | | ^ Color ^ VOLTAGE | ||
+ | ^ P1 | RED| 5V| | ||
+ | ^ P2 | RED| 5V| | ||
+ | ^ P3 | ||
+ | ^ P4 | BLUE| 3.3V| | ||
+ | ^ P5 | BLUE| 3.3V| | ||
+ | ^ P6 | | ||
+ | ^ P7 | | ||
+ | ^ P8 | | ||
+ | ^ P9 | | ||
+ | ^ P10 | | ||
+ | ^ P11 | | ||
+ | ^ P12 | | ||
+ | ^ P13 | | ||
+ | ^ P14 | | ||
+ | ^ P15 | | ||
+ | |||
+ | \\ \\ \\ | ||
+ | | ^ Color ^ VOLTAGE | ||
+ | ^ P1 | RED| 5V| | ||
+ | ^ P2 | WHITE| | ||
+ | ^ P3 | ||
+ | ^ P4 | BLACK| | ||
+ | ^ P5 | BLACK| | ||
+ | ^ P6 | | ||
+ | ^ P7 | | ||
+ | ^ P8 | | ||
+ | ^ P9 | | ||
+ | ^ P10 | | ||
fm_towns/ha_type_power_supply.1626792726.txt.gz · Last modified: 2021/07/21 00:52 by Cyothevile