Differences

This shows you the differences between two versions of the page.

--- fm_towns:hg_hr_power_supply [2021/07/07 21:32] – created Cyothevile
+++ fm_towns:hg_hr_power_supply [2021/07/07 21:41] (current) – Cyothevile
@@ Line 1: / Line 1: @@
 Note that C7 must be no taller than 44mm? and spacing is about 7mm.
+{{:fm_towns:hrpsu.jpg?400|}}
@@ Line 15: / Line 17: @@
 ^ C53    |   10UF|  50V|
 ^ C54    |   10UF|  50V|
+**Reference for row and pin used.  Look at the wiring harness connector itself not the PSU board.**
+|      ^ COLOR            ^ FUNCTION          ^
+^ R1 P1    |  ORANGE|    Connected to fan (not critical)|
+^ R1 P2    |  YELLOW|    TownsOS Power off|
+^ R1 P3    |  RED|  Power Button|
+^ R1 P4    |  BLACK|  GROUND|
+^ R1 P5    |    BLACK|  GROUND|
+^ R1 P6    |   BLACK|  GROUND|
+^ R1 P7    |   BLACK|  GROUND|
+^ R1 P8    |  BLACK|  GROUND|
+^ R2 P9    |   BROWN|  5V|
+^ R2 P10    |   BROWN|  5V|
+^ R2 P11    |   BROWN|  5V|
+^ R2 P12    |   BROWN|  5V|
+^ R2 P13    |   BROWN|  12V|
+^ R2 P14    |   BROWN|  12V|
+^ R2 P15    |   BROWN|  -12V|
+^ R2 P16    |  BLACK|  GROUND|