Differences

This shows you the differences between two versions of the page.

--- imports:sega_saturn [2009/11/26 21:27] – Idiots. Lawrence
+++ imports:sega_saturn [2017/06/19 06:29] – [The Country Codes] fixed typo in closed jumper table for US and J region JP6/JP7 totoroslayer
@@ Line 18: / Line 18: @@
 ==== The Country Codes ====
 This table lists the jumpers that should be CLOSED to set a certain region.
+Note: I (phreak97) Just modded an early Japanese saturn which had JP6 and JP7 reversed. It took me ages to figure out that it was set to south america instead of USA.
+You can tell if yours is reversed by confirming the jumper positions before you start. This console according to the jumper labels appeared to be set to "Do Not Use" but was actually set to Japan as it should have been.
 ^Region^Jumpers (Closed Jumpers)^^^^
 ^.^JP6/JP7^JP8/JP9^JP10/JP11^JP12/JP13^
 ^  Do Not Use |     JP6  |  JP9  |  JP11  |  JP13  |
-^  Japan |          JP7  |  JP9  |  JP11  |  JP13  |
+^  Japan |          JP6  |  JP9  |  JP11  |  JP13  |
 ^  Asia NTSC |      JP6  |  J08  |  JP11  |  JP13  |
 ^  Sega Reserved |  JP7  |  J08  |  JP11  |  JP13  |
-^  North America |  JP6  |  JP9  |  JP10  |  JP13  |
+^  North America |  JP7  |  JP9  |  JP10  |  JP13  |
 ^  Mid + S America NTSC	|  JP7  |  JP9  |  JP10  |  JP13  |
 ^  Korea |          JP6  |  J08  |  JP10  |  JP13  |