User Tools

Site Tools


imports:sega_saturn

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
imports:sega_saturn [2009/11/20 21:53] 119.111.124.194imports:sega_saturn [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 18: Line 18:
 ==== The Country Codes ==== ==== The Country Codes ====
 This table lists the jumpers that should be CLOSED to set a certain region. This table lists the jumpers that should be CLOSED to set a certain region.
 +
 +Note: I (phreak97) Just modded an early Japanese saturn which had JP6 and JP7 reversed. It took me ages to figure out that it was set to south america instead of USA.
 +You can tell if yours is reversed by confirming the jumper positions before you start. This console according to the jumper labels appeared to be set to "Do Not Use" but was actually set to Japan as it should have been.
 +
 ^Region^Jumpers (Closed Jumpers)^^^^                           ^Region^Jumpers (Closed Jumpers)^^^^                          
 ^.^JP6/JP7^JP8/JP9^JP10/JP11^JP12/JP13^                        ^.^JP6/JP7^JP8/JP9^JP10/JP11^JP12/JP13^                       
 ^  Do Not Use |     JP6  |  JP9  |  JP11  |  JP13  |           ^  Do Not Use |     JP6  |  JP9  |  JP11  |  JP13  |          
-^  Japan |          JP7   JP9  |  JP11  |  JP13  |          +^  Japan |          JP6   JP9  |  JP11  |  JP13  |          
 ^  Asia NTSC |      JP6  |  J08  |  JP11  |  JP13  |           ^  Asia NTSC |      JP6  |  J08  |  JP11  |  JP13  |          
 ^  Sega Reserved |  JP7  |  J08  |  JP11  |  JP13  |           ^  Sega Reserved |  JP7  |  J08  |  JP11  |  JP13  |          
-^  North America |  JP6   JP9  |  JP10  |  JP13  |    +^  North America |  JP7   JP9  |  JP10  |  JP13  |    
 ^  Mid + S America NTSC |  JP7  |  JP9  |  JP10  |  JP13  | ^  Mid + S America NTSC |  JP7  |  JP9  |  JP10  |  JP13  |
 ^  Korea |          JP6  |  J08  |  JP10  |  JP13  |           ^  Korea |          JP6  |  J08  |  JP10  |  JP13  |          
Line 58: Line 62:
  
 ==== Locating The Jumpers ==== ==== Locating The Jumpers ====
-There are several different revisions of Saturn PCB.  The jumpers moved around a lot.  Often they're close to each other, but some PCBs have them spread out, and even on different sides of the PCB.  Here are the [[http://www.superiorpapers.com/|research papers]] photos of every known Saturn PCB, as well as the diagrams showing the locations for every common point (A, B, C or D) for each jumper pair.  Well, almost.  There is one set of images missing. FIXME+There are several different revisions of Saturn PCB.  The jumpers moved around a lot.  Often they're close to each other, but some PCBs have them spread out, and even on different sides of the PCB.  Here are the photos of every known Saturn PCB, as well as the diagrams showing the locations for every common point (A, B, C or D) for each jumper pair.  Well, almost.  There is one set of images missing. FIXME
  
 ^ Diagram ^ Photo ^ ^ Diagram ^ Photo ^
imports/sega_saturn.1258717999.txt.gz · Last modified: 2019/08/27 20:44 (external edit)