Differences

This shows you the differences between two versions of the page.

Link to this comparison view

schematics:5200cart [2019/08/27 20:45] (current)
Line 1: Line 1:
 +==== Atari 5200 Cartridge Slot Pinout ====
  
 +{{schematics:​card_edge_36.jpg}}
 +
 +
 +4 Port Model:
 +
 +^  Top Row  ^^^^^^^^^^^^^^^^^^
 +^  36  ^  35  ^  34  ^  33  ^  32  ^  31  ^  30  ^  29  ^  28  ^  27  ^  26  ^  25  ^  24  ^  23  ^  22  ^  21  ^  20  ^  19  ^
 +|  Interlock ​ |  A11  | A12  |  A10  |  A13  |  A9  |  NC  |  A8  |  NC  |  A7 |  See Note  |  GND  |  GND  |  GND  |  A4  |  A3  |  A1  |  A0  |  ​
 +
 +^  Bottom Row  ^^^^^^^^^^^^^^^^^^
 +^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  ^  9  ^  10  ^  11  ^  12  ^  13  ^  14  ^  15  ^  16  ^  17  ^  18 ^
 +|  D0  |  D1  |  D2  |  D3  |  D4  |  D5  |  D6  |  D7  |  ENB 8000-BFFF ​ |  ENB 4000-7FFF ​ |  NC  |  GND  |  GND  |  GND  |  A6  |  A5  |  A2  |  Interlock ​ |
 +
 +^2 Port Differences^^
 +^Pin 24^ |  Video In  |
 +^Pin 30^ |  Audio In  |
 +
 +A*: Address Line
 +
 +D*: Data Line
 +
 +ENB: Enable
 +
 +FIXME I don't own a 5200 at the moment. Jay Tilton'​s site lists Pin 26 as being tied to +5V, but the 5200 FAQ list it as being tied directly to the power supply (+12V). I hope someone can check and fill in pin 26.
 
 schematics/5200cart.txt ยท Last modified: 2019/08/27 20:45 (external edit)
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Driven by DokuWiki