Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
x68000:adding_an_fdx68_to_x68000 [2020/06/25 12:26]
leonk [Connection Method]
x68000:adding_an_fdx68_to_x68000 [2020/06/25 12:29] (current)
leonk [Connection Method]
Line 40: Line 40:
 ===== Connection Method ===== ===== Connection Method =====
  
-The external FDD connecter is labelled "​EXTERNAL FDD" on the back of the X68000. This is a very unusual port known as the "​miniature delta ribbon (MDR) 40 position female connector"​. In order to connect an external device to this port an MDR 40 position male connector is necessary. The FDX68 author made a cable for converting this port to a standard 34-pin ribbon cable connector. One should be able to purchase the MDR 40 position male connector at many online retail stores. You will also need to purchase matching enclosure shell for the connector. The 3M part number is 10140-3000PE+The external FDD connecter is labelled "​EXTERNAL FDD" on the back of the X68000. This is a very unusual port known as the "​miniature delta ribbon (MDR) 40 position female connector"​. In order to connect an external device to this port an MDR 40 position male connector is necessary. The FDX68 author made a cable for converting this port to a standard 34-pin ribbon cable connector. One should be able to purchase the MDR 40 position male connector at many online retail stores. You will also need to purchase matching enclosure shell for the connector. The 3M part number ​for the connector ​is 10140-3000PE ​and matching shell is 10340-3210-000
  
 {{:​x68000:​fdx68_xvi_fd_connector.png?​nolink&​200|}} {{:​x68000:​fdx68_xvi_fd_connector.png?​nolink&​200|}}
 
 x68000/adding_an_fdx68_to_x68000.txt ยท Last modified: 2020/06/25 12:29 by leonk
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Driven by DokuWiki