x68000:cz-6bs1_-_genuine_sharp_scsi_board
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
x68000:cz-6bs1_-_genuine_sharp_scsi_board [2011/12/03 05:11] – eidis | x68000:cz-6bs1_-_genuine_sharp_scsi_board [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 5: | Line 5: | ||
{{: | {{: | ||
- | SCSI genuine Sharp Corporation | + | This is a genuine Sharp Corporation |
- | The initial specification | + | |
{{: | {{: | ||
- | 1. Product Overview | + | **1. Product Overview** |
- | 1-1 Overview This board is a personal workstation series | + | 1-1 Overview |
- | (Small computer system interface - → SCSl (Smail | + | |
- | Mass Storage | + | This board is made for X68000 |
- | Beteta | + | Small Computer System Interface |
+ | |||
+ | 1-2 Features | ||
+ | |||
+ | *Mass Storage | ||
+ | | ||
- | 2. Product configuration | + | **2. Package contents** |
- | When removed from the packing case, when Kuta make sure that you have shipped | + | When unboxed, make sure that you have received |
- | SCSl software | + | * SCSI brackets |
- | □ List your consult your instruction book window | + | * Floppy disk with SCSI software |
- | Carton ●, packaging materials, please have a safe place. | + | |
- | For example, during reshipment ● Please use Ganarazu failure. | + | * Instruction manual |
+ | * Waranty voucher | ||
+ | * List of customer services | ||
- | 3. Notes on installation issues for flights | + | Please keep packaging materials in safe place. |
- | When installing the computer to Podo ● This instruction manual that came with the computer " | + | **3. Installation notes** |
- | ● When using the Podo book, when read in conjunction Kuta instruction manual of the device SCSl. | + | |
- | When not in use for long ●, Podo remove this from the computer when to protect it from ESD connector into the supplied anti-static bag. | + | |
- | Should ●, and discontinue use when you feel a failure or abnormal gil of purchase, when you Kuta consult your nearest office or contact us. | + | |
- | (Please note in particular our point). | + | |
- | SCSI interface and CZ ● hard disk interface - at × 68000 series except for the 623C, the interface of hard Gita with far different and specifications SCSl interface on Human68k is not arrived there as an interface of another system that interfaces the two . In hard disks and hard disks connected to the SOSl interface is connected to a hard disk interface is a far different representations, | + | |
- | The former hard simply (at sign HD0 ~ HD15) and represent the case of the latter device or hard SCSl (at sign SCSl0 ~ SCSl7) and is expressed. | + | |
- | (" | + | |
- | SCSl ● ID numbers for hard disk interface and the interface is so physically different interfaces as described above, up to 16 hard disk interface (No. 0 to No. 15 from the device number), up to a maximum of seven SCSl interface (lD No. 6 from No. 0 to No.) No. 23 devices can be connected to the total. | + | |
- | Takemasu was used without problems even among the same number of the device ID number that is connected to the interface SCSl lD number of devices that are connected to the hard disk interface Tay. | + | |
- | 4. Names and handling procedures | + | *When installing SCSI bracket pay attention to which one you need, because desktop models such as CZ-652C, CZ-653C, CZ-662C, CZ-663C have different dimensions. Switch the power switch to " |
+ | *Use this device only after installing the bracket and reading the instruction manual which came with your SCSI device. | ||
+ | *When not in use for long periods of time, remove the device from computer and put it into the supplied anti-static bag to protect it from electro static discharge. | ||
+ | *If the device has stopped working, please contact the nearest customer service center. | ||
+ | *The SCSI interface and X68000 integrated SASI interface, except for the CZ-623C, is different and SCSI interface is seen by Human68k as another interface that can interchange data betwean both interfaces. Devices which are connected to SASI interface and those which are connected to SCSI have different representation ID's. For example, SASI (HD0 - HD15) and SCSI (SCSI0 - SCSI7). Device may be marked with ID that it represents. | ||
+ | *ID numbers for SCSI and SASI devices differ and they are physically different interfaces. As described above, SASI can handle up to 16 devices, SCSI can handle up to a maximum of 7 devices. A maximum of 23 devices can be connected in total. | ||
+ | This board was used without problems even after connecting the same amount of devices to SCSI and SASI interface at the same time. | ||
+ | |||
+ | **4. Names and handling procedures** | ||
4-1 Names of Parts | 4-1 Names of Parts | ||
- | {{: | + | {{: |
+ | |||
+ | 4-2 Jumper settings | ||
- | Switch | + | Jumpers |
- | If you own a software interrupt | + | Set the priority level of the interrupt request signal |
- | Set the priority level of the interrupt request signal | + | |
- | | |JP1 Setting | + | | | JP1 | JP2 | |
- | |If you use a Level 2 |1-2 jumper inserted between the socket | + | | Level 2 | 1-2 | 1-2 | |
- | |If you use four Rebaru | + | | Level 4 |
- | {{: | + | Kernel-level priority interrupt request signal will be activated and allowed signal will be set to the same level. |
+ | Both jumpers must be set at the same level. | ||
- | Kyung-level priority interrupt request signal will be activated and allowed is set to the same level. | + | 4-3 Compatible X68000 hardware |
- | At level 2 interrupt request level, such as how to use it at level 4 and level interrupt is not allowed. | + | |
- | Attached to a 4-3 X68000 series ● CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C installed in the case of the connector and attach to the l / 0 slot 2 again. | + | *When used in tower models such as CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C |
- | CZ is already for sale ※-6BE2, CZ-6BE4, CZ-6BF1, CZ-6BM1, CZ-6BP1, CZ-board and 6BC1 (CZ-6BS1) If the combination is, I make sure before you install this board Please attach to / O slot 1. | + | *For desktop models such as CZ-652C, CZ-653C, CZ-662C, CZ-663C please |
- | (CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-board such as 6BN1 is in relation to the connector, in conjunction with this board please note that you can.) | + | |
- | ● CZ-652C, CZ-653C, CZ-662C, CZ-663C | + | |
- | The board that use of the ※ I / O slot cover, | + | |
- | However, for the computer (CZ-600C, CZ-601C, CZ-611C, CZ-602C, CZ-612C, CZ-603C, CZ-for 613C) I / O slot cover, | + | |
" | " | ||
- | {{: | + | {{: |
x68000/cz-6bs1_-_genuine_sharp_scsi_board.1322853075.txt.gz · Last modified: 2019/08/27 20:44 (external edit)