NFG Games + GameSX

This is a genuine Sharp Corporation SCSI board. It is SCSI1 compliant and is the most reliable because it is genuine.

1. Product Overview

1-1 Outline This board is made for X68000 personal workstation series (except CZ-623) and is attached to I/0 expansion slot. It can be used with SCSI MO drives, hard disks or CD-ROM/RW units. Smail Computer System Interface (SCSI) is the standard for data exchange between computer systems and peripherals.

1-2 Features Mass Storage device with the following fetures:

● Mass Storage Device with SCSI interface: up to seven devices can be connected in daisy-chain as Unicast, .

● Data transfer rate is faster than for SASI interface.

2. Product configuration

When removed from the packing case, when Kuta make sure that you have shipped the following things. SCSl software de Pau (sheet 5 inches 2HD1) □ List your consult your instruction book window I / O Surotsutokapa (Note) Carton ●, packaging materials, please have a safe place. For example, during reshipment ● Please use Ganarazu failure.

3. Notes on installation issues for flights

When installing the computer to Podo ● This instruction manual that came with the computer “extended system” with reference items, the rear body of the computer always (but, OZ-6520, 653C, 662C, 663C, plug plug the power Unplug the connector Sai.) Suitsuchi the power “Off” (OFF) then please go to. ● When using the Podo book, when read in conjunction Kuta instruction manual of the device SCSl. When not in use for long ●, Podo remove this from the computer when to protect it from ESD connector into the supplied anti-static bag. Should ●, and discontinue use when you feel a failure or abnormal gil of purchase, when you Kuta consult your nearest office or contact us. (Please note in particular our point). SCSI interface and CZ ● hard disk interface - at × 68000 series except for the 623C, the interface of hard Gita with far different and specifications SCSl interface on Human68k is not arrived there as an interface of another system that interfaces the two . In hard disks and hard disks connected to the SOSl interface is connected to a hard disk interface is a far different representations, for example. The former hard simply (at sign HD0 ~ HD15) and represent the case of the latter device or hard SCSl (at sign SCSl0 ~ SCSl7) and is expressed. (“Hard” may be marked with a symbol that case SCSl in the vicinity of.) SCSl ● ID numbers for hard disk interface and the interface is so physically different interfaces as described above, up to 16 hard disk interface (No. 0 to No. 15 from the device number), up to a maximum of seven SCSl interface (lD No. 6 from No. 0 to No.) No. 23 devices can be connected to the total. Takemasu was used without problems even among the same number of the device ID number that is connected to the interface SCSl lD number of devices that are connected to the hard disk interface Tay.

4. Names and handling procedures

4-1 Names of Parts

Switch JP1 jumper setting on the switch on hoard 4-2, JP2 interrupt priority level 2 and 4 as 68000MP ∪ He interrupts (from the I / 0 Surotsuto are two levels available) Set whether to use either This switch is used to. The included software interrupt processing in the setting of the switch so jacket does not use is optional. (Factory default is set to level 2 for a bottle.) If you own a software interrupt processing is set as follows. Set the priority level of the interrupt request signal switch jacket JP2, set the interrupt priority level of the signal allowed by the jacket Switch JP1. The priority level can be selected as a Level 2 or Level 4.

Kyung-level priority interrupt request signal will be activated and allowed is set to the same level. At level 2 interrupt request level, such as how to use it at level 4 and level interrupt is not allowed.

Attached to a 4-3 X68000 series ● CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C installed in the case of the connector and attach to the l / 0 slot 2 again. CZ is already for sale ※-6BE2, CZ-6BE4, CZ-6BF1, CZ-6BM1, CZ-6BP1, CZ-board and 6BC1 (CZ-6BS1) If the combination is, I make sure before you install this board Please attach to / O slot 1. (CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-board such as 6BN1 is in relation to the connector, in conjunction with this board please note that you can.) ● CZ-652C, CZ-653C, CZ-662C, CZ-663C installed in the case, please attach to the I / 0 slot 4. The board that use of the ※ I / O slot cover, I / O expansion box for the base unit and a computer (CZ-6EB1) because we have two ships with a slot cover for the slot corresponding to each Please use the cover. However, for the computer (CZ-600C, CZ-601C, CZ-611C, CZ-602C, CZ-612C, CZ-603C, CZ-for 613C) I / O slot cover, CZ-6BF1, CZ-6BM1CZ- 6BC1 (board connector for connection to external devices) when combined with this board, etc. Please note that you can not use.

“Connection Example”