Differences

This shows you the differences between two versions of the page.

--- x68000:cz-6bs1_-_genuine_sharp_scsi_board [2011/12/11 08:43] – eidis
+++ x68000:cz-6bs1_-_genuine_sharp_scsi_board [2019/08/27 20:45] (current) – external edit 127.0.0.1
@@ Line 48: / Line 48: @@
 -1 Names of Parts
-{{:x68000:cz-6bs1_3.png|}}
+{{:x68000:cz-6bs1_3_translated.png|}}
 -2 Jumper settings
-Jumpers JP1, JP2 set the interrupt priority for 68000MPU to level 2 or 4 (Source I/0 is available in two levels) and the board interprets from the jumper settings which one to use. Factory default is set to level 2. If you own the software, interrupt handling is set as follows.
+Jumpers JP1, JP2 set the interrupt priority for 68000 CPU to level 2 or 4 (Source I/0 is available in two levels) and the board interprets from the jumper settings which one to use. Factory default is set to level 2. If you own the software, interrupt handling is set as follows.
 Set the priority level of the interrupt request signal with jumper JP2, set the interrupt priority level of the allowed signal with jumper JP1. The priority level can be selected as Level 2 or Level 4.
@@ Line 62: / Line 62: @@
 Both jumpers must be set at the same level.
--3 Compatible X68000 computers
+-3 Compatible X68000 hardware
-  *CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C installed in the case of the connector and attach to the I/0 slot 2.
+  *When used in tower models such as CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C the device must be installed in I/0 slot 2. If you are planing to use the CZ-6BS1 in conjunction with CZ-6BE2, CZ-6BE4, CZ-6BF1, CZ-6BM1, CZ-6BP1, CZ-6BC1, please populate I/O slot 1 before installing this board. This board can also be used in conjunction with CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-6BN1 boards.
-  *These boards are already for sale CZ-6BE2, CZ-6BE4, CZ-6BF1, CZ-6BM1, CZ-6BP1, CZ-board and 6BC1 (CZ-6BS1) If both I/O slots will be used, please populate the I/O slot 1 before installing this board.
+  *For desktop models such as CZ-652C, CZ-653C, CZ-662C, CZ-663C please install the device in I/O slot 4. Since the introduction of I/O expansion box (CZ-6EB1) we ship two brackets. Please use the appropriate. However the bracket can not be used in CZ-600C, CZ-601C, CZ-611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C alongside with CZ-6BF1, CZ-6BM1, CZ-6BC1 when combined with this board.
-  *CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2 are like CZ-6BN1 board, the connector and Relation, combined with this board Please note possible. )
-(CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-board such as 6BN1 is in relation to the connector, in conjunction with this board please note that you can.)
-● CZ-652C, CZ-653C, CZ-662C, CZ-663C installed in the case, please attach to the I / 0 slot 4.
-The board that use of the ※ I / O slot cover, I / O expansion box for the base unit and a computer (CZ-6EB1) because we have two ships with a slot cover for the slot corresponding to each Please use the cover.
-However, for the computer (CZ-600C, CZ-601C, CZ-611C, CZ-602C, CZ-612C, CZ-603C, CZ-for 613C) I / O slot cover, CZ-6BF1, CZ-6BM1CZ- 6BC1 (board connector for connection to external devices) when combined with this board, etc. Please note that you can not use.
 "Connection Example"
-{{:x68000:cz-6bs1_4.png|}}
+{{:x68000:cz-6bs1_4_translated.png|}}