x68000:cz-6bs1_-_genuine_sharp_scsi_board
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
x68000:cz-6bs1_-_genuine_sharp_scsi_board [2011/12/11 22:21] – eidis | x68000:cz-6bs1_-_genuine_sharp_scsi_board [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 48: | Line 48: | ||
4-1 Names of Parts | 4-1 Names of Parts | ||
- | {{: | + | {{: |
4-2 Jumper settings | 4-2 Jumper settings | ||
- | Jumpers JP1, JP2 set the interrupt priority for 68000MPU | + | Jumpers JP1, JP2 set the interrupt priority for 68000 CPU to level 2 or 4 (Source I/0 is available in two levels) and the board interprets from the jumper settings which one to use. Factory default is set to level 2. If you own the software, interrupt handling is set as follows. |
Set the priority level of the interrupt request signal with jumper JP2, set the interrupt priority level of the allowed signal with jumper JP1. The priority level can be selected as Level 2 or Level 4. | Set the priority level of the interrupt request signal with jumper JP2, set the interrupt priority level of the allowed signal with jumper JP1. The priority level can be selected as Level 2 or Level 4. | ||
Line 64: | Line 64: | ||
4-3 Compatible X68000 hardware | 4-3 Compatible X68000 hardware | ||
- | *When used in CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C the device must be installed in I/0 slot 2. If you are planing to use the CZ-6BS1 in conjunction with CZ-6BE2, CZ-6BE4, CZ-6BF1, CZ-6BM1, CZ-6BP1, CZ-6BC1, please populate I/O slot 1 before installing this board. This board can work in conjunction with CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2 | + | *When used in tower models such as CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C the device must be installed in I/0 slot 2. If you are planing to use the CZ-6BS1 in conjunction with CZ-6BE2, CZ-6BE4, CZ-6BF1, CZ-6BM1, CZ-6BP1, CZ-6BC1, please populate I/O slot 1 before installing this board. This board can also be used in conjunction with CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-6BN1 |
- | + | *For desktop models | |
- | (CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-board | + | |
- | ● CZ-652C, CZ-653C, CZ-662C, CZ-663C | + | |
- | The board that use of the ※ I / O slot cover, | + | |
- | However, for the computer (CZ-600C, CZ-601C, CZ-611C, CZ-602C, CZ-612C, CZ-603C, CZ-for 613C) I / O slot cover, | + | |
" | " | ||
- | {{: | + | {{: |
x68000/cz-6bs1_-_genuine_sharp_scsi_board.1323606085.txt.gz · Last modified: 2019/08/27 20:44 (external edit)