Differences

This shows you the differences between two versions of the page.

--- x68000:don_t_have_a_sasi_scsi_cable [2015/01/09 01:16] – eidis
+++ x68000:don_t_have_a_sasi_scsi_cable [2019/08/27 20:45] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== How to construct a SASI or SCSI X68000 cable ======
- First of all you will either two SASI or SCSI connectors and one Common connector. They all have 2.54mm pitch and can be easily purchased on eBay.
+ First of all you will need either two IDC20 or IDC26 female connectors and one IDC50 female connector. They all have 2.54mm pitch and can be easily purchased on eBay.
-|{{:x68000:idc20.jpg?200|}}|{{:x68000:idc26.jpg?200|}}|{{:x68000:idc50.jpg?200|}}|{{:x68000:awg28_50way_colorful_ribbon_cable.jpg?200|}}|{{:x68000:idc_crimping_tool.jpg?200|}}|
+|{{:x68000:idc20.jpg?200|}}|{{:x68000:idc26.jpg?200|}}|{{:x68000:idc50.jpg?200|}}|
-|  IDC20 (SASI)  |  IDC26 (SCSI)  |  IDC50 (Common)  |  50 Way Cable  |  IDC Crimping tool  |
+|  IDC20 (SASI)  |  IDC26 (SCSI)  |  IDC50 (Common)  |
+ Next you will need a 50 way AWG28 colorful flat ribbon cable with 2.54mm pitch and a IDC crimping tool.
+|{{:x68000:awg28_50way_colorful_ribbon_cable.jpg?200|}}|{{:x68000:idc_crimping_tool.jpg?299|}}|
+|  50 Way Cable  |  IDC Crimping tool  |
+This is how an original SASI cable looks like. It is approximately 34cm (13.4 in) long.
+|{{:x68000:sasi_cable.jpg?600}}|
+Now use the following pinouts to align the cable with the connectors. Click on the images to enlarge.
+|{{:x68000:x68000_20pin_to_50pin_sasi_cable_diagram.jpg?300}}|{{:x68000:x68000_26pin_to_50pin_scsi_cable_diagram.jpg?300}}|
+|  SASI pinouts  |  SCSI pinouts  |
+Once alligned, it should look similar to this. (a completely unrelated IDC connector is used in the following example)
+|{{:x68000:crimping_example.jpg?300|}}|
+Now use the crimping tool to finish the job.