Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
-・Sharp reserved $00～3f
-^ Address  ^ Vector  ^ Description  ^
-|$000000|$00| Initial SSP|
-|$000004|$01| Initial PC|
-|$000008|$02| Bus error|
-|$00000c|$03| Address error|
-|$000010|$04| Illegal instruction|
-|$000014|$05| Divide by zero|
-|$000018|$06| CHK instruction|
-|$00001c|$07| TRAPV, FTRAPcc instruction|
-|$000020|$08| Privilege violation|
-|$000024|$09| Trace exception handling|
-|$000028|$0a| Unimplemented instruction line 1010 emulator (SX call)|
-|$00002c|$0b| Unimplemented instruction line 1111 emulator (DOS call, floating point operation)|
-|$000030|$0c| Unused|
-|$000034|$0d| FPU protocol violation exception handling|
-|$000038|$0e| FPU format violation exception handling|
-|$00003c|$0f| Uninitialized interrupt|
-|$000040|$10| Unused|
-|$000044|$11| 〃|
-|$000048|$12| 〃|
-|$00004c|$13| 〃|
-|$000050|$14| 〃|
-|$000054|$15| 〃|
-|$000058|$16| 〃|
-|$00005c|$17| 〃|
-|$000060|$18| Spurious interrupt|
-|$000064|$19| Level 1 interrupt (autovector)|
-|$000068|$1a| 〃 2 〃|
-|$00006c|$1b| 〃 3 〃|
-|$000070|$1c| 〃 4 〃|
-|$000074|$1d| 〃 5 〃|
-|$000078|$1e| 〃 6 〃|
-|$00007c|$1f| 〃 7 〃(NMI)|
-|$000080|$20| trap #0|
-|$000084|$21| 〃  #1|
-|$000088|$22| 〃  #2|
-|$00008c|$23| 〃  #3|
-|$000090|$24| 〃  #4|
-|$000094|$25| 〃  #5|
-|$000098|$26| 〃  #6|
-|$00009c|$27| 〃  #7|
-|$0000a0|$28| 〃  #8  (System reserved)|
-|$0000a4|$29| 〃  #9  (OS debugger)|
-|$0000a8|$2a| 〃  #10 (Reset/power processing)|
-|$0000ac|$2b| 〃  #11 (BREAK key)|
-|$0000b0|$2c| 〃  #12 (COPY key)|
-|$0000b4|$2d| 〃  #13 (CTRL+C)|
-|$0000b8|$2e| 〃  #14 (error handling)|
-|$0000bc|$2f| 〃  #15 (IOCS call)|
-|$0000c0|$30| FPU BSUN (Branch/Set on Unordered) Exception handling|
-|$0000c4|$31| 〃  INEX1,INEX2 (Inexact Decimal Input,Inexact Operation)|
-|$0000c8|$32| 〃  DZ  (Divide by Zero)|
-|$0000cc|$33| 〃  UNFL (Underflow)|
-|$0000d0|$34| 〃  OPERR (Operand Error)|
-|$0000d4|$35| 〃  OVFL (Overflow)|
-|$0000d8|$36| 〃  SNAN (Signalling Not A Number)|
-|$0000dc|$37| Unused|
-|$0000e0|$38| MMU|
-|$0000e4|$39| 〃|
-|$0000e8|$3a| 〃|
-|$0000ec|$3b| Unused|
-| …| …|…|
-|$0000fc|$3f|Unused|
-・User interrupt $40～$ff
-^ Address  ^ Vector  ^ Description  ^
-|$000100|$40|MFP RTC alarm/1Hz|
-|$000104|$41|MFP External power OFF|
-|$000108|$42|MFP Front switch OFF|
-|$00010c|$43|MFP FM sound source|
-|$000110|$44|MFP Timer-D (used for BG processing)|
-|$000114|$45|MFP Timer-C (mouse/cursor/FDD/etc control)|
-|$000118|$46|MFP V-DISP|
-|$00011c|$47|MFP RTC clock|
-|$000120|$48|MFP Timer-B|
-|$000124|$49|MFP key serial out error|
-|$000128|$4a|MFP キーシリアル出力空|
-|$00012c|$4b|MFP key serial in error|
-|$000130|$4c|MFP キーシリアル入力あり|
-|$000134|$4d|MFP Timer-A|
-|$000138|$4e|MFP CRTC･IRQ|
-|$00013c|$4f|MFP H-SYNC|
-|$000140|$50|SCC(B) Transmit buffer empty|
-|$000144|$51|SCC(B) 〃|
-|$000148|$52|SCC(B) External status change|
-|$00014c|$53|SCC(B) 〃|
-|$000150|$54|SCC(B) Received character(mouse 1 byte input)|
-|$000154|$55|SCC(B) 〃|
-|$000158|$56|SCC(B) Special Rx condition|
-|$00015c|$57|SCC(B) 〃|
-|$000160|$58|SCC(A) Transmit buffer empty|
-|$000164|$59|SCC(A) 〃|
-|$000168|$5a|SCC(A) External status change|
-|$00016c|$5b|SCC(A) 〃|
-|$000170|$5c|SCC(A) Received character(RS-232C 1 byte input)|
-|$000174|$5d|SCC(A) 〃|
-|$000178|$5e|SCC(A) Special Rx condition|
-|$00017c|$5f|SCC(A) 〃|
-|$000180|$60|I/O FDC Status interrupt|
-|$000184|$61|I/O FDC Insert/Eject interrupt|
-|$000188|$62|I/O HDC status interrupt|
-|$00018c|$63|I/O Printer ready interrupt|
-|$000190|$64|DMAC #0 End  (FDD)|
-|$000194|$65|DMAC #0 Error(〃 )|
-|$000198|$66|DMAC #1 End  (SASI)|
-|$00019c|$67|DMAC #1 Error(〃)|
-|$0001a0|$68|DMAC #2 End  (IOCS _DMAMOVE,_DMAMOV_A,_DMAMOV_L)|
-|$0001a4|$69|DMAC #2 Error(〃) |
-|$0001a8|$6a|DMAC #3 End  (ADPCM)|
-|$0001ac|$6b|DMAC #3 Error(〃)|
-|$000200|$6c|SPC SCSI interrupt(Internal SCSI)|
-|$000204|$6d|Unused|
-|…|…|…|
-|$0003d4|$f5|Unused|
-|$0003d8|$f6|SPC SCSI interrupt(SCSI board)|
-|$0003dc|$f7|Unused|
-|…|…|…|
-|$0003fc|$ff|Unused|