Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
x68000:file_transfer_between_windows_pcs_and_x68000_machines_using_null_modem_cable [2014/08/15 16:37]
eidis
x68000:file_transfer_between_windows_pcs_and_x68000_machines_using_null_modem_cable [2019/08/27 20:45] (current)
Line 30: Line 30:
 Now, the procedure: Now, the procedure:
  
-==== 1.  Download and install Tera Term Pro ver. 2.3 for Windows on your PC ====+====== 1.  Download and install Tera Term Pro ver. 2.3 for Windows on your PC ======
  
 Download ttermp23.zip from: Download ttermp23.zip from:
Line 39: Line 39:
  
  
-==== 2.  Download ZM.X for X68000 ====+====== 2.  Download ZM.X for X68000 ​======
  
 Download ZMX68K4.LZH from: Download ZMX68K4.LZH from:
Line 48: Line 48:
  
  
-==== 3.  Extract sxmr.zip onto the Windows PC ====+====== 3.  Extract sxmr.zip onto the Windows PC ======
  
 http://​homepage2.nifty.com/​m_kamada/​sxmr.lzh http://​homepage2.nifty.com/​m_kamada/​sxmr.lzh
Line 55: Line 55:
  
  
-==== 4.  Setup the serial port of the Windows PC ====+====== 4.  Setup the serial port of the Windows PC ======
  
 Start Tera Term Pro. Start Tera Term Pro.
Line 72: Line 72:
  
  
-==== 5.  Setup the RS-232C port of the X68000 ====+====== 5.  Setup the RS-232C port of the X68000 ​======
  
 Using Human68k version 3.02: Using Human68k version 3.02:
Line 97: Line 97:
  
  
-==== 6.  Transfer sxmr.bas from the Windows PC to the X68000 ====+====== 6.  Transfer sxmr.bas from the Windows PC to the X68000 ​======
  
 At the X68000 Command line type: At the X68000 Command line type:
Line 120: Line 120:
  
  
-==== 7.  Transfer ZM.X from Windows PC to X68000 ====+====== 7.  Transfer ZM.X from Windows PC to X68000 ​======
  
   *If you already have an LZH extractor on your X68000, transfer the file ZMX68K4.LZH.   *If you already have an LZH extractor on your X68000, transfer the file ZMX68K4.LZH.
Line 160: Line 160:
  
  
-==== 8.  Transfer any files from Windows PC to X68000 ====+====== 8.  Transfer any files from Windows PC to X68000 ​======
  
 At the X68000 Command line type: At the X68000 Command line type:
Line 180: Line 180:
  
  
-==== 9.  Transfer any files from X68000 to Windows PC ====+====== 9.  Transfer any files from X68000 to Windows PC ======
  
 <​code>​From Tera Term Pro <​code>​From Tera Term Pro
Line 196: Line 196:
  
  
-==== 10.  Transfer files at 38400 bps speed ====+====== 10.  Transfer files at 38400 bps speed ======
  
 It is possible to achieve even higher speeds with MuTerm. It is possible to achieve even higher speeds with MuTerm.
Line 246: Line 246:
 Please note that there is no need to use the SPEED command because MuTerm sets RS232 port speed and parameters automatically. Please note that there is no need to use the SPEED command because MuTerm sets RS232 port speed and parameters automatically.
  
-==== 11.  Transfer any files at 38400 bps from Windows PC to X68000 ====+====== 11.  Transfer any files at 38400 bps from Windows PC to X68000 ​======
  
 <​code>​From Tera Term Pro <​code>​From Tera Term Pro
Line 259: Line 259:
  
  
-==== 12.  Transfer any files at 38400 bps from X68000 to Windows PC ====+====== 12.  Transfer any files at 38400 bps from X68000 to Windows PC ======
  
 <​code>​From Tera Term Pro <​code>​From Tera Term Pro
 
 x68000/file_transfer_between_windows_pcs_and_x68000_machines_using_null_modem_cable.txt ยท Last modified: 2019/08/27 20:45 (external edit)
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Driven by DokuWiki