Differences

This shows you the differences between two versions of the page.

--- x68000:h.a.r.p_for_mc68000_-_cpu_accelerator_board [2012/01/26 03:08] – eidis
+++ x68000:h.a.r.p_for_mc68000_-_cpu_accelerator_board [2012/01/26 03:11] – eidis
@@ Line 13: / Line 13: @@
 ☆ ☆ ☆ Oh!X Information ☆ ☆ ☆
-H.A.R.P will accelerate the CPU and double its internal clock speed 2x up to 20MHz. But the built-in factory default will remain at 10MHz because it is needed for arbitration.
+H.A.R.P will accelerate the CPU and double its internal clock speed 2x up to 20MHz. But the built-in factory default will remain at 10MHz because it is needed for arbitration. That is, it is working in full-20MHZ when CPU calculates and !!!!! when accessing the external bus is considerably 落Tosane do not have to 10MHz.
-That is, when calculated in the CPU is even moving into full-20MHZ, when accessing the external bus is considerably 落Tosane do not have to 10MHz.
 Therefore, the actual rate of say what happens, "We have only about 10% faster!" Is that it is not.