Differences

This shows you the differences between two versions of the page.

--- x68000:hard_drive_on_sasi_machine [2014/12/01 20:38] – [Chapter 1: SCSI to IDE/CF/SD adapter] eidis
+++ x68000:hard_drive_on_sasi_machine [2023/07/04 17:44] (current) – add another link TD-Linux
@@ Line 2: / Line 2: @@
 Using a SCSI to IDE/CF/SD adaptor as a hard drive on X68000 hardware.
-Six devices are detailed below:
+Seven devices are detailed below:
-  * I-O Data IDSC21-E
+  * I-O Data [[http://nfggames.com/x68000/Documentation/SCSI%20Adapter%20Manuals/IDSC21E-Version2.1.pdf|IDSC21-E]]
-  * Yamaha V769970
+  * Yamaha [[http://nfggames.com/x68000/Documentation/SCSI%20Adapter%20Manuals/Yamaha%20V769970.pdf|V769970]]
-  * Acard AEC-7720U
+  * Acard [[http://nfggames.com/x68000/Documentation/SCSI%20Adapter%20Manuals/AEC-7720U_UW.pdf|AEC-7720U]]
-  * I-O Data R-IDSC-E/R
+  * I-O Data [[http://nfggames.com/x68000/Documentation/SCSI%20Adapter%20Manuals/R-IDSC-E050418.pdf|R-IDSC-E/R]]
-  * STRATOS CF AztecMonster
+  * STRATOS [[http://nfggames.com/x68000/Documentation/SCSI%20Adapter%20Manuals/CF_AZTECMONSTER_MN_E_13.pdf|CF AztecMonster]]
-  * code/src designs SCSI2SD
+  * code/src designs [[http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD_UserManual|SCSI2SD]]
-  * Classic PC Rescue Committee CLPC-CFSxSI101
+  * Classic PC Rescue Committee [[http://nfggames.com/x68000/Documentation/SCSI%20Adapter%20Manuals/CLPC-CFSxSI101%20SASI_SCSI%20Adapter.pdf|CLPC-CFSxSI101]]
 Most of them were tested on an ACE-HD system, but compatibility for all X68000 should be the same.
@@ Line 53: / Line 53: @@
 {{:x68000:cf_aztecmonster.jpg}}
-**SCSI2SD** is an open hardware and open source project by [[http://shop.codesrc.com/|codesrc designs]]. It features a Micro-SD card slot, is firmware updatable and configurable over USB, costs considerably less than STRATOS CF AztecMonster and is compatible with X68000. Make sure to update it to the latest firmware if you want to use it with SASI.
+**SCSI2SD** is an open hardware and open source project by [[http://shop.codesrc.com/|codesrc designs]]. It features a Micro-SD card slot, is firmware updatable and configurable over USB, costs considerably less than STRATOS CF AztecMonster and is compatible with X68000. Make sure to update it to the latest firmware if you want to use it with SASI bus.
 For **SCSI2SD** the following settings were used:
@@ Line 59: / Line 59: @@
     * Termination On
     * Parity Off
+To support the HDD LED, see [[x68000:SCSI emulator HDD LED]].
 {{:x68000:scsi2sd_v3.0.jpg?500}}
-**Classic PC Rescue Committee [[http://nfggames.com/x68000/Documentation/X68000%20Manuals/CLPC-CFSxSI101%20SASI_SCSI%20Adapter.pdf|CLPC-CFSxSI101]]** adapter is special because it can be used in native SASI or SCSI mode. All previous adapters only support SCSI mode.
+**CLPC-CFSxSI101** is special because it is the only one which can be used in native SASI or SCSI mode. All previous adapters only work in SCSI mode. It is made in Japan, works with CF cards and can be purchased from [[http://classicpc.org/cpc_cf-sxsi.html|Classic PC Rescue Committee]]'s home page.
-{{:x68000:clpc-cfsxsi101_1.jpg?200}}|{{:x68000:clpc-cfsxsi101_2.jpg?200}}
+{{:x68000:clpc-cfsxsi101_1.jpg?400}}{{:x68000:clpc-cfsxsi101_2.jpg?400}}
 ==== Chapter 2 Connecting the hardware ====
@@ Line 87: / Line 89: @@
 {{x68000:x68000_26pin_to_50pin_scsi_cable_diagram.jpg?650}}
-Please follow this tutorial if you want HD BUSY led to work:
+Please follow one of these tutorials if you want the HDD LED to work:
+[[x68000:SCSI emulator HDD LED]]
 [[http://gamesx.com/wiki/doku.php?id=x68000:led_board|HDD Led Mod]]