Differences

This shows you the differences between two versions of the page.

--- x68000:irc_internet_on_x68000_using_null_modem_cable [2012/01/01 01:23] – eidis
+++ x68000:irc_internet_on_x68000_using_null_modem_cable [2012/01/17 12:49] – neko68k
@@ Line 20: / Line 20: @@
 <code>inetdconf +dns 192.168.0.1</code>
 You have to do this anyway so might as well just make it happen. This is to point at your dns server, I used the IP address of my router.
+While you're at it, change:
+<code>inetd</code>
+to
+<code>inetd -t -1</code>
+This allows internet to work in KOWIN.
   *unlzh TMSIO031.LZH and put TMSIO.X in \BIN
   *unlzh TCPPACKA.LZH and merge the folders it contains with your existing \BIN \ETC and \MAN
-  *edit \ETC\hosts and \ETC\networks to reflect your actual network. for example:
+  *edit \ETC\hosts and \ETC\networks to reflect your actual network, for example:
 <code>
@@ Line 64: / Line 72: @@
   *At the prompt type the following where:
     *192.168.0.10 is the host IP, 192.168.0.11 is the x68k IP. It doesn't matter what these are necessarily as long as they dont collide with any other IP addresses on your network.
-    */dev/ttyS0 is your serial port(ttyS0|COM1 ttyS1:COM2 etc)
+    */dev/ttyS0 is your serial port(ttyS0:COM1 ttyS1:COM2 etc)
 <code>pppd -detach crtscts lock proxyarp 192.168.0.10:192.168.0.11 /dev/ttyS0 38400</code>