Differences

This shows you the differences between two versions of the page.

--- x68000:irc_internet_on_x68000_using_null_modem_cable [2012/01/17 12:35] – neko68k
+++ x68000:irc_internet_on_x68000_using_null_modem_cable [2012/02/12 05:49] – neko68k
@@ Line 32: / Line 32: @@
   *unlzh TMSIO031.LZH and put TMSIO.X in \BIN
   *unlzh TCPPACKA.LZH and merge the folders it contains with your existing \BIN \ETC and \MAN
-  *edit \ETC\hosts and \ETC\networks to reflect your actual network. for example:
+  *edit \ETC\hosts and \ETC\networks to reflect your actual network, for example:
 <code>
@@ Line 72: / Line 72: @@
   *At the prompt type the following where:
     *192.168.0.10 is the host IP, 192.168.0.11 is the x68k IP. It doesn't matter what these are necessarily as long as they dont collide with any other IP addresses on your network.
-    */dev/ttyS0 is your serial port(ttyS0|COM1 ttyS1:COM2 etc)
+    */dev/ttyS0 is your serial port(ttyS0:COM1 ttyS1:COM2 etc)
 <code>pppd -detach crtscts lock proxyarp 192.168.0.10:192.168.0.11 /dev/ttyS0 38400</code>
@@ Line 88: / Line 88: @@
   *[[http://nfggames.com/X68000/Mirrors/x68pub/x68tools/UNIX/NETWORK/lynx27r0.lzh|Lynx]] is probably as good as any.
   *I tested [[http://nfggames.com/X68000/Mirrors/x68pub/x68tools/UNIX/NETWORK/vwxb25.lzh|VWX]] and it had serious out of memory problems.
-  *I also tested [[http://nfggames.com/X68000/Mirrors/x68pub/x68tools/UNIX/NETWORK/webx010.lzh|WebXpression]], it works but not well.
+  *I also tested [[http://w2332.nsk.ne.jp/~gonta/arc/wx046_0b_0206220.lzh|WebXpression]], this version works very well.
   *For IRC I recommend [[http://sharl.haun.org/a/x68/clat-beta5.tar.gz|Clat]]