x68000:soft_power_switch_troubleshooting_and_repair
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
x68000:soft_power_switch_troubleshooting_and_repair [2012/11/21 00:17] – eidis | x68000:soft_power_switch_troubleshooting_and_repair [2012/11/21 00:18] – eidis | ||
---|---|---|---|
Line 49: | Line 49: | ||
*Bad IC28 (74LS08) (stuck output). | *Bad IC28 (74LS08) (stuck output). | ||
*Bad Q9 transistor (shorted). | *Bad Q9 transistor (shorted). | ||
- | *Bad C64 (generating noise). | + | *Bad C64 capacitor |
*IC29 (74LS244) might have bad output on pin 5. | *IC29 (74LS244) might have bad output on pin 5. | ||
*The power signal from the main board, which I miss infos actually. A fix to this could be soldering a 10K ohm resistor between IC28 pin 10 and 14. | *The power signal from the main board, which I miss infos actually. A fix to this could be soldering a 10K ohm resistor between IC28 pin 10 and 14. | ||
x68000/soft_power_switch_troubleshooting_and_repair.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1