Differences

This shows you the differences between two versions of the page.

--- x68000:xellent30s_-_cpu_accelerator_board [2014/08/28 14:24] – eidis
+++ x68000:xellent30s_-_cpu_accelerator_board [2019/08/27 20:45] (current) – external edit 127.0.0.1
@@ Line 73: / Line 73: @@
 <file>
->switch boot=scsi0		- Sets the ROM boot mode and boot ROM address
+>switch boot=scsi0		- Sets the ROM boot mode and ROM boot address
 >db				- Starts the debugger
 -mes e8e00d 31			- Enables writing to SRAM
@@ Line 79: / Line 79: @@
 -rch30_omake.sys,ed0100		- Copies ch30_omake.sys to SRAM
 -mew ed0100+[ed0106].l 4e75	- Sets the length of the SRAM boot program
--mel ed0106 [ed000c].l		- Saves the ROM boot address
+-mel ed0106 [ed000c].l		- Sets the ROM boot address
--mes ed0106 [ed0018].b		- Saves the ROM boot mode
+-mes ed0106 [ed0018].b		- Sets the ROM boot mode
 -mel ed010a ecc000		- Sets the I/O port address of Xellent30
 -mes e8e00d 00			- Finishes writing to SRAM
 -q				- Exits the debugger
 >switch sram=program		- Sets the SRAM usage mode
->switch boot=ram$ed0100		- Sets SRAM boot mode and SRAM boot address
+>switch boot=ram$ed0100		- Sets the SRAM boot mode and SRAM boot address
 </file>
+**Boot keys after installation**
+  *[XF1] .... Switch MPU using the selection menu.
+  *[XF3] .... Switch MPU.
+  *[SPACE] ... Same as above.
+  *[XF4] .... Temporarily turn off the MPU cache of 68030.
+  *[XF5] .... Display SCSI boot ID (+ extra options) selection menu.
+  *[ESC] .... Temporarily boots as STD.
+  *[HELP] .... Boots with HD Start Partition Selection Menu (IPL MENU).