Differences

This shows you the differences between two versions of the page.

--- x68000:xsimm6_-_memory_expansion_board [2011/12/03 06:03] – eidis
+++ x68000:xsimm6_-_memory_expansion_board [2019/08/27 20:45] (current) – external edit 127.0.0.1
@@ Line 5: / Line 5: @@
 {{:x68000:xsimm6_1.jpg|}}
-XSIMM6 (Six Sim X) is manufactured and sold from 1994 Systems Research Ltd., Tokyo, built-in SIMM memory expansion board, and there XSIMM6c XVICompact dedicated exclusively XSIMM6 XVI.
+XSIMM6 (Six Sim X) was invented and manufactured in 1994 by Systems Research Ltd., Tokyo. It is a memory expansion board with built-in SIMM memory socket and there are two variants of it:
-This is due to the different shape and mounting of internal memory XVICompact XVI, and that is its own thing.
+  *XSIMM6 designed for X68000 XVI
+  *XSIMM6c designed for X68000 XVI Compact
+This is due to different shape and mounting positions of internal memory expansion for XVI and XVI Compact.
 |{{:x68000:xsimm6_2.jpg|}}  |{{:x68000:xsimm6_3.jpg|}}  |
-|  XSIMM6  |  XSIMM6c|
+|  XSIMM6  |  XSIMM6c  |
-These XSIMM (Single In-line Memory Module) is installed in the SIMM modules following the vertical dimension of 30 mm are commercially available.
-For compatible machines • PC / AT: 9 bit (with parity) 72 pin for Macintosh: 8-bit or 72-pin 4MB, SIMM's 8MB (70ns and there is 60ns, which is OK but, 60ns and the clock up if ones) 2MB of memory XVI by the additional 6MB or 4MB.
-Middle of the board as the left picture, the bottom of the SIMM installed, with a dip switch to set the memory in this expansion area.
+These XSIMM boards use the following 72pin SIMM memory modules which height must not exceed 30 mm (the default height is 25 mm).
-DIP switch settings, proceed as follows.
+  *PC/AT compatible: 9-bit (with parity) 72-pin
+  *Macintosh: 8-bit, 72-pin
-|{{:x68000:xsimm6_4.jpg|}}  |{{:x68000:xsimm6_5.jpg|}}  |
+It supports 4MB and 8MB SIMM's (70ns and 60ns SIMM's will work but only at 70ns). It can expand the X68000 memory with additional 2MB, 4MB or 6MB.
+There is a dip-switch panel in the middle of the board right below the SIMM socket.
+The dip-switch settings are as follows:
-Ie, or 8MB SIMM in place 6MB, if all four switches to ON, additional capacity is 6MB. (Set the picture above).
+|{{:x68000:xsimm6_4.jpg|}}  |{{:x68000:xsimm6_5_translated.png|}}  |
-* The product's manufacturer, Research Systems, Ltd., Tokyo is.
+The memory will be expanded with additional 6MB even if an 8MB SIMM will be installed and all four switches are set to ON.