User Tools

Site Tools


x68000:xsimm6_-_memory_expansion_board

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
x68000:xsimm6_-_memory_expansion_board [2011/12/12 02:56] eidisx68000:xsimm6_-_memory_expansion_board [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 7: Line 7:
 XSIMM6 (Six Sim X) was invented and manufactured in 1994 by Systems Research Ltd., Tokyo. It is a memory expansion board with built-in SIMM memory socket and there are two variants of it: XSIMM6 (Six Sim X) was invented and manufactured in 1994 by Systems Research Ltd., Tokyo. It is a memory expansion board with built-in SIMM memory socket and there are two variants of it:
   *XSIMM6 designed for X68000 XVI   *XSIMM6 designed for X68000 XVI
-  *XSIMM6c designed for X68000 XVI Compact+  *XSIMM6c designed for X68000 XVI Compact
 This is due to different shape and mounting positions of internal memory expansion for XVI and XVI Compact. This is due to different shape and mounting positions of internal memory expansion for XVI and XVI Compact.
 |{{:x68000:xsimm6_2.jpg|}}  |{{:x68000:xsimm6_3.jpg|}}  | |{{:x68000:xsimm6_2.jpg|}}  |{{:x68000:xsimm6_3.jpg|}}  |
 |  XSIMM6  |  XSIMM6c  | |  XSIMM6  |  XSIMM6c  |
  
-These XSIMM boards use 72pin SIMM memory modules which height must not exceed 30 mm (the default height is 25 mm).+These XSIMM boards use the following 72pin SIMM memory modules which height must not exceed 30 mm (the default height is 25 mm).
   *PC/AT compatible: 9-bit (with parity) 72-pin   *PC/AT compatible: 9-bit (with parity) 72-pin
   *Macintosh: 8-bit, 72-pin   *Macintosh: 8-bit, 72-pin
  
-4MB or 8MB SIMM's (70ns and 60ns will work but, 60ns and the clock up if ones2MB of memory XVI by the additional 6MB or 4MB.+It supports 4MB and 8MB SIMM's (70ns and 60ns SIMM'will work but only at 70ns). It can expand the X68000 memory with additional 2MB, 4MB or 6MB. 
 +There is a dip-switch panel in the middle of the board right below the SIMM socket 
 +The dip-switch settings are as follows:
  
-Middle of the board as the left picture, the bottom of the SIMM installed, with a dip switch to set the memory in this expansion area +|{{:x68000:xsimm6_4.jpg|}}  |{{:x68000:xsimm6_5_translated.png|}}  |
-DIP switch settings, proceed as follows.+
  
-|{{:x68000:xsimm6_4.jpg|}}  |{{:x68000:xsimm6_5.jpg|}} +The memory will be expanded with additional 6MB even if an 8MB SIMM will be installed and all four switches are set to ON.
- +
-Ie, or 8MB SIMM in place 6MB, if all four switches to ON, additional capacity is 6MB. (Set the picture above).  +
- +
-* The product's manufacturer, Research Systems, Ltd., Tokyo is.+
  
x68000/xsimm6_-_memory_expansion_board.1323622605.txt.gz · Last modified: 2019/08/27 20:44 (external edit)