Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |
arcade:3d_printable_parts [2024/01/11 09:09] – [Sega * City v1] NFG | arcade:3d_printable_parts [2024/05/09 09:17] (current) – [Sega * City v1] fix typo NFG |
---|
Sega's Aero and Astro City cabinets used a [[arcade:control_panels#sega_aero_astro_city_v1_panel_mount|2 hole 96mm mount]] with a 75mm gap into which most joystick mechs can fit. | Sega's Aero and Astro City cabinets used a [[arcade:control_panels#sega_aero_astro_city_v1_panel_mount|2 hole 96mm mount]] with a 75mm gap into which most joystick mechs can fit. |
| |
This adaptor plate will allow [[arcade:joystick_mechs#sanwa|Sanwa JLF-compatible mechs]], as well as [[arcade:joystick_mechs#seimitsu|Seimitsu's 40- and 50mm mechs]]. Because of the functional depth and thickness of the plate (10mm + 3mm respectively) it's possible that some sticks may not easily fit if they use fast-on space connectors. | This adaptor plate will allow [[arcade:joystick_mechs#sanwa|Sanwa JLF-compatible mechs]], as well as [[arcade:joystick_mechs#seimitsu|Seimitsu's 40- and 50mm mechs]]. Because of the functional depth and thickness of the plate (10mm + 3mm respectively) it's possible that some sticks may not easily fit if they use fast-on spade connectors. |
| |
{{ :arcade:sega-3way-adaptor.jpg?400 |Joystick adaptor plate for Sega control panels}} | {{ :arcade:sega-3way-adaptor.jpg?400 |Joystick adaptor plate for Sega control panels}} |
| |
{{ :arcade:sega-3way-1.3.zip |}} | {{ :arcade:sega-3way-1.3.zip |}} |