x68000:xsimm10_-_memory_expansion_board
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
x68000:xsimm10_-_memory_expansion_board [2012/01/12 09:16] – eidis | x68000:xsimm10_-_memory_expansion_board [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 19: | Line 19: | ||
However, due to the vertical size limitations of I/O expansion slots, there are following SIMM module vertical size restrictions: | However, due to the vertical size limitations of I/O expansion slots, there are following SIMM module vertical size restrictions: | ||
- | *When mounted in slot 1: Less than 15.3mm | + | *When mounted in slot 1: Height must be less than 15.3mm |
- | *When mounted in slot 2: Less than 20.4mm | + | *When mounted in slot 2: Height must be less than 20.4mm |
If the size is exceeded, the adjacent slot is unusable. | If the size is exceeded, the adjacent slot is unusable. | ||
- | In addition, when used with the following models, you must have a total of 2MB internal memory to add more RAM and 1MB of internal memory expansion board in advance. | + | In addition, when used with the following models, you must have a 1MB of internal memory expansion board in advance and a total of 2MB internal memory to add more RAM. |
{{: | {{: | ||
- | XSIMM10 SIMM modules must have the same access time and memory capacity | + | XSIMM10 SIMM modules must have the same access time and memory capacity |
- | SIMM modules with 4MB or 1MB capacity can be used as a pair. However, to implement two pairs, do not use 4MB SIMM modules. | + | SIMM modules with 4MB or 1MB capacity can be used for the first pair. However, do not use 4MB SIMM modules |
- | *A Pair (Aペア): | + | *A Pair (Aペア): |
- | *B Pair (Bペア): | + | *B Pair (Bペア): |
- | {{: | + | **Dipswitch settings** |
- | **DIP switch settings** | + | Click on the following images to enlarge. |
- | + | ||
- | S1 and S2 DIP switch settings as pictured above. | + | |
- | *0 = ON | + | |{{: |
- | | + | | |
- | (OFF = 1 is displayed on the board) | + | **Configuration examples** |
- | DIP switch settings as shown below. | + | |
- | |{{:x68000:xsimm10_5_translated.png?250|}} |{{:x68000:xsimm10_6.jpg?250|}} |{{: | + | |{{:x68000:xsimm10_6_translated.png?350|}} |{{:x68000:xsimm10_7_translated.png?350|}} | |
+ | | S1 Dipswitch settings | ||
- | DIP switch | + | Dipswitch |
- | * The product' | + | Keep the scene alive ! |
+ | Eidis |
x68000/xsimm10_-_memory_expansion_board.1326323791.txt.gz · Last modified: 2019/08/27 20:44 (external edit)