av:adding_5v_to_scart_lead
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
av:adding_5v_to_scart_lead [2019/08/27 20:45] – external edit 127.0.0.1 | av:adding_5v_to_scart_lead [2020/07/28 08:48] (current) – Added connector detail NFG | ||
---|---|---|---|
Line 20: | Line 20: | ||
* Use a reliable connector for the power, and use some wire that's thick enough to not break off or wear out during normal use. | * Use a reliable connector for the power, and use some wire that's thick enough to not break off or wear out during normal use. | ||
- | === Apologies | + | === Connector |
- | I don't know what the connector | + | The 2-pin connector used here is a [[http:// |
== Alternative for Scart == | == Alternative for Scart == | ||
* A quick fix can be implemented by using a 9V battery (positive lead on Pin 8, negative lead on any of the grounds) and a 150 Ohms resistor between Pin 8 and Pin 16. | * A quick fix can be implemented by using a 9V battery (positive lead on Pin 8, negative lead on any of the grounds) and a 150 Ohms resistor between Pin 8 and Pin 16. | ||
* Either three or four AA batteries can be used as well.(definitely use four if they' | * Either three or four AA batteries can be used as well.(definitely use four if they' |
av/adding_5v_to_scart_lead.txt · Last modified: 2020/07/28 08:48 by NFG