User Tools

Site Tools


av:dreamcastav

This is an old revision of the document!


Dreamcast AV Connector

The Dreamcast connector is a wild, multi-functioned beast. It offers several outputs in the default configuration (composite and s-video), and can output two kinds of 15kHz RGB, as well as VGA, when the proper mode is selected.

ASCII

PinDescriptionPinDescription
1 Ground 9 Horizontal Sync (for VGA)
2 Right Audio 10 Composite Sync
3 Left Audio 11 S-video Chrominance (C)
4 +12v 12 S-video Luminance (Y)
5 +5v 13 Composite Video
6 Mode Select 1 14 Blue Out
7 Mode Select 2 15 Green Out
8 Vertical Sync (for VGA) 16 Red Out

Usage Notes

The select pins are 6 and 7. Ground either one for two kinds of 15kHz RGB, ground both for VGA. Note that the Dreamcast outputs VGA, the box or cable does not 'upscan', so Dreamcast VGA boxes cannot be used for converting low-res RGB to VGA on other consoles.

You should use a 220uf capacitor on each of the RGB lines (+ towards console).

Note!! Please note that some of games will not run with a VGA box, or with the RGB/SCART mod. Most do, however.

Other

av/dreamcastav.1220702241.txt.gz · Last modified: 2019/08/27 20:44 (external edit)