User Tools

Site Tools


av:japanese_rgb-21

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
av:japanese_rgb-21 [2005/11/29 06:27] – created 198.209.225.230av:japanese_rgb-21 [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 1: Line 1:
-==== The Pinout ==== +===== Japanese 21-pin RGB connector ===== 
-{{http://www.gamesx.com/hwb/images/conn_scartm.gif}} +The Japanese RGB-21 connector, also known as EIAJ TTC-003 apparently, is identical in appearance to the European [[scart_connector|SCART]] (or Péritel or Euroconnector).  The pinout is completely different however.  There's an RGB<- ->SCART adaptor pinout [[scart2rgb|here]]. 
-^ Pin ^ Description ^ + 
-|  1  |Right audio+=== Simple version === 
-|  2  |NC| + 
-|  3  |Left audio shield| +{{connectors:con-rgb21.gif}} 
-|   |NC| +^ Pin ^ Description ^ Pin ^ Description ^ 
-|   |Left audio+|  1 |Left audio  |  2 | NC  
-|   |NC| +|  3 |Audio shield   4 |NC  | 
-|   |Sync shield| +|  5 |Right audio   6 |NC  | 
-|   |NC+|  7 |Sync shield   8 |NC  
-|   |Sync+|  9 |Sync  |  10 |NC  
-|  10  |NC+|  11 |+5v   12 |NC  
-|  11  |NC+|  13 |Red shield  |  14 |NC  
-|  12  |NC+|  15 |Red   16 | 1V*  | 
-|  13  |Red shield| +|  17 |Green shield   18 |Blue shield  
-|  14  |NC+|  19 |Green   20 |Blue  
-|  15  |Red+|  21 | Ground  | 
-|  16  |+5v+ 
-|  17  |Green shield| +  * *connect to pin 11 via 3.3k Ohm resistor.  The resistor isn't usually necessary, and +5v on this pin will most often work. 
-|  18  |Blue shield+ 
-|  19  |Green+=== Full Version === 
-|  20  |Blue| +This version includes every pin, including a few you'll never really need to know.  All labels are display-relative, so input means into the display.   
-|  21  |Ground|+ 
 +Most of these pins can be safely ignored for most purposes.   
 + 
 +{{connectors:con-rgb21.gif}} 
 +|  1  | Audio left channel input|  2  | Audio left channel output  
 +|   Audio ground  |  4  | Audio ground  
 +|   Audio right channel input  |  6  | Audio right channel output  
 +|  7  | Video ground  |  8  | Video ground 
 +|  9  | CVBS input  |  10  | CVBS output 
 +|  11  | AV control input  |  12  | Ym input  
 +|  13  | Red signal ground  |  14  | Ground  
 +|  15  | Red signal I/O  |  16  | Ys input
 +|  17  | Green signal ground  |  18  | Blue signal ground  
 +|  19  | Green signal I/O  |  20  | Blue signal I/O  
 +|  21  | Plug shield 
 + 
 +Special Notes: 
 +  * Audio Input: 0.40 mVrms, > 47K ohms 
 +  * Audio Output: 0.40 mVrms, > 10K ohms 
 +  * CVBS (Composite Video) in and out: 1 Vp-p, 75 ohms, sync: negative 
 +  * Ym Input: Switches RGB to half-brightness, for video overlay (L: < 0.4V, H: > 1V, 75 ohms) 
 +  * Ys Input: RGB in/out: (Ground for output, 1V+ for Input (preferred)((A lot of displays won't show RGB at all without Vcc on this line))) 
 +  * All RGB lines: 0.7 Vp-p, 75 ohms 
 + 
 +---- 
 +The detailed version was found on [[http://vhd.co.kr/tech/if/d/d.htm|this Korean page]] 
av/japanese_rgb-21.1133209652.txt.gz · Last modified: 2019/08/27 20:44 (external edit)