controls:neo_geo_controller
Differences
This shows you the differences between two versions of the page.
Next revisionBoth sides next revision | |||
controls:neo_geo_controller [2005/12/03 18:22] – created 67.97.154.131 | controls:neo_geo_controller [2008/03/27 11:33] – external edit 127.0.0.1 | ||
---|---|---|---|
Line 13: | Line 13: | ||
This diagram shows the connector looking at the end of the joystick cable. The numbering runs backwards to match the numbering of a DB-15 male connector. These connectors should be available at any electronics store, or perhaps a computer store. It's the same as an IBM joystick connector. | This diagram shows the connector looking at the end of the joystick cable. The numbering runs backwards to match the numbering of a DB-15 male connector. These connectors should be available at any electronics store, or perhaps a computer store. It's the same as an IBM joystick connector. | ||
- | Note! Pin 8 provides +5v to the controller. This is unused in the original stick, but is mandatory for proper use of the pads and new-style sticks. | + | * Pin 8 provides +5v to the controller. This is unused in the original stick, but is mandatory for proper use of the pads and new-style sticks. |
+ | * There are two D pins. While the controller returns low for both pins 9 and 4, only 4 is ' |
controls/neo_geo_controller.txt · Last modified: 2023/05/11 09:49 by NFG