Differences

This shows you the differences between two versions of the page.

--- x68000:040excel_necessary_modifications [2015/06/19 11:19] – hyperneogeo
+++ x68000:040excel_necessary_modifications [2019/08/27 20:45] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ===== 040EXCEL Necessary Modifications =====
-If you're lucky enough to find yourself in possession of an 040EXCEL accelerator board, there are some things you'll need.  First, grab [[gamesx>x68000/Misc/Drivers/040EXCEL%20software/|the 040EXCEL drivers]] from the GameSX X68000 archive.  Then bust out your soldering iron 'cause it's gonna get fun in here.
+If you're lucky enough to find yourself in possession of an 040EXCEL accelerator board, there are some things you'll need.  First, grab [[http://nfggames.com/x68000/Misc/Drivers/040EXCEL%20software/|the 040EXCEL drivers]] from the GameSX X68000 archive　(Thank you Plastic-san!).  Then bust out your soldering iron 'cause it's gonna get fun in here.
 The photos are terrible because 1998, so if you're doing any of these mods, please snap some new ones.
@@ Line 66: / Line 66: @@
 {{ :x68000:kaizou.jpg?100 |}}
-Put IC 4, 5 in the jumper socket, then IC11, 12...and that should do it for the AS245s. Finally take the reconfiguring cable and connect it to the EXCEL, then you are done.
+Put IC 4, 5 in the jumper socket, then the AS245s into IC11, 12 ...and that should do it for the AS245s. Finally take the reconfiguring cable and connect it to the EXCEL, then you are done.
 ＩＣ4，5にジャンパソケット、ＩＣ11，12に改造済みＡＳ245、改造用ケーブルをエクセルにつないで完成。