x68000:how_to_open_x68000
This is an old revision of the document!
How to open X68000
EXPERT is used in the following tutorial and this guide should work for ACE, EXPERT, SUPER, XVI and X68030.
 | Unscrew the six circled screws. |
 | The left and right sidepanel is fixed to the main case with nine plastic hooks. |
 | Press the sidepanel inward while pulling it back, as seen in the picture. Remove left and right sidepanel. |
 | The right tower contains I/O slots, RGB unit and the main motherboard. Remove the circled power connector. The power cable comes from the left tower. |
 | The left tower contains power supply, floppy disk drives, hard disk bracket and a hard drive (HD models). |
 | Disconnect the power supply cables and unscrew the circled screws. |
 | The removed power supply. |
 | Disconnect all connectors from the floppy drives. |
 | The removed floppy disk drives. |
 | Unscrew the circled screws of right tower and remove the I/O slot riser. You can unscrew the three screws which are circled in black to make the procedure easier. |
 | Unscrew the circled screws and remove the RGB unit. |
 | |
 |
x68000/how_to_open_x68000.1407915682.txt.gz · Last modified: 2019/08/27 20:44 (external edit)