x68000:led_board
This is an old revision of the document!
This guide is intended for X68000 users who have upgraded their systems with CF reader which features HDD activity led.
For this mod you'll require:
CF adapter with activity leds
Pin Header
Heat Shrink Sleeve
A neat Black and Red cable pair (You can salvage them from old PC computer cases)
First of all desolder the HDD activity led and solder a pin header in its place.
{{ :x68000:led_mod_1.jpg }}
Then desolder the HD BUSY light diode from the led panel and solder the wires to it. If you look carefully inside the light diode, you will see a small triangle which goes to one pin, and a bigger form which goes to the other pin. The bigger form is Ground, the small triangle pin is Positive. Prepare a small piece of heat shrink sleeve for each cable, solder the cable to the light diode and heat the heat shrink sleeve with the soldering iron to make it shrink. The result should look similar to this.
{{ :x68000:led_mod_2.jpg }}
When all is finished, reassemble the led board, swith on the X68000 and enjoy.
{{ :x68000:led_mod_3.jpg }}
Keep the scene alive !
Eidis
x68000/led_board.1297201172.txt.gz · Last modified: 2019/08/27 20:44 (external edit)