Differences

This shows you the differences between two versions of the page.

--- x68000:midi_cable [2014/08/10 00:48] – eidis
+++ x68000:midi_cable [2019/08/27 20:45] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 **How to make the mini DIN 5pin to DIN 5pin convert cable for SYSTEM SACOM Co.Ltd's MIDI board.**
-{{:x68000:midi_cable_1.gif?200|}}
+|{{:x68000:midi_cable_2.gif?100|}}  |{{:x68000:midi_cable_1.gif?900|}}  |
+All information taken from http://www.sssp.mihara.hiroshima.jp/~shimsoft/x68/midicable/mkmidicablee.html
+Required Materials (Parts and Tools)
+|DIN 5 pin socket   |Qty. 1  |
+|Mini DIN 5 pin connector  |Qty. 1  |
+|5 wire cable  |Qty. Your required length. Mine was about 15cm.  |
+The Sharp boards and the 2nd SACOM board have the same pinout. The image shows solder side of the connectors. Connect points as shown in the diagram (1-1,2-2, ...5-5). Test the connections with a multimeter and make sure that they are correct. Connect the cable to MIDI board and MIDI sound module via MIDI Standard cable.
+**Example:**
+X68k MIDI board's MIDI out port -> Created cable -> MIDI standard cable -> MIDI sound module
+Try playing music on X68k with Z-music or other music software. If MIDI sound module is receiving the MIDI message, then your work is done.