x68000:midi_cable
This is an old revision of the document!
How to make the mini DIN 5pin to DIN 5pin convert cable for SYSTEM SACOM Co.Ltd's MIDI board.
 |  |
Required Materials (Parts and Tools)
| DIN 5 pin jack connector | Qty. 1 |
| Mini DIN 5 pin plug connector | Qty. 1 |
| 5 wire cable | Qty. Your required length. Mine was about 15cm. |
The image shows solder side of the connectors. Connect points as shown in the diagram (1-1,2-2, …5-5). Test the connections with a multimeter and make sure that they are correct. Connect the cable to MIDI board and MIDI sound module via MIDI Standard cable.
Example:
X68k MIDI board's MIDI out port → Created cable → MIDI standard cable → MIDI sound module
Try playing music on X68k with Z-music or other music system software. If MIDI sound module is receiving the MIDI message, then your job is finished.
x68000/midi_cable.1407597011.txt.gz · Last modified: 2019/08/27 20:44 (external edit)