x68000:xsimm10_-_memory_expansion_board
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
x68000:xsimm10_-_memory_expansion_board [2012/01/23 08:20] – eidis | x68000:xsimm10_-_memory_expansion_board [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 19: | Line 19: | ||
However, due to the vertical size limitations of I/O expansion slots, there are following SIMM module vertical size restrictions: | However, due to the vertical size limitations of I/O expansion slots, there are following SIMM module vertical size restrictions: | ||
- | *When mounted in slot 1: Less than 15.3mm | + | *When mounted in slot 1: Height must be less than 15.3mm |
- | *When mounted in slot 2: Less than 20.4mm | + | *When mounted in slot 2: Height must be less than 20.4mm |
If the size is exceeded, the adjacent slot is unusable. | If the size is exceeded, the adjacent slot is unusable. | ||
Line 32: | Line 32: | ||
SIMM modules with 4MB or 1MB capacity can be used for the first pair. However, do not use 4MB SIMM modules for the second pair. | SIMM modules with 4MB or 1MB capacity can be used for the first pair. However, do not use 4MB SIMM modules for the second pair. | ||
- | *A Pair (Aペア): | + | *A Pair (Aペア): |
- | *B Pair (Bペア): | + | *B Pair (Bペア): |
**Dipswitch settings** | **Dipswitch settings** | ||
Line 47: | Line 47: | ||
| S1 Dipswitch settings | | S1 Dipswitch settings | ||
- | Dipswitch settings were taken from XSIMM10 instruction manual, copyright by Systems Research | + | Dipswitch settings were taken from XSIMM10 instruction manual, copyright by Systems Research |
Keep the scene alive ! | Keep the scene alive ! | ||
Eidis | Eidis |
x68000/xsimm10_-_memory_expansion_board.1327270833.txt.gz · Last modified: 2019/08/27 20:44 (external edit)